Floor Stain Pre-Conditioner

Littlefair's Wood Finishing Products SKU: FDPC-15ML-FBA
Floor Stain Pre-Conditioner
Floor Stain Pre-Conditioner
Floor Stain Pre-Conditioner
Floor Stain Pre-Conditioner
Floor Stain Pre-Conditioner
Floor Stain Pre-Conditioner

Floor Stain Pre-Conditioner

Littlefair's Wood Finishing Products SKU: FDPC-15ML-FBA
/
  • In stock, ready to ship
  • Currently out of stock!
For Wood Floors
Water Based
Eco Friendly
Easy to apply
Low Odour
Quick Drying
Size
  • Free UK Shipping on Orders Over £30
  • Shipping Worldwide
  • Secure payments
Tax included. Shipping calculated at checkout.
 Drying Time

The conditioner will be touch dry in minutes and the stain can be applied after two hours - or sooner in warm conditions.

Please note: this is an approximate drying time. There could be a number of factors that may affect this. 
Coverage

Approx. coverage of 10-12m² per litre, for one liberal coat.

This water based formula is intended for use before applying Littlefair’s Floor Stain. It will penetrate bare pine and porous hardwoods, partially sealing the grain allowing the stain to colour the wood more evenly. It will create a clearer, lighter, more ‘modern’ look if desired, rather than a ‘rustic, aged’ effect.

Our products come complete with easy to follow yet comprehensive instructions to guide you through every step, including preparing the wood.  Should you require any further help please feel free to get in touch, here, for expert advice. 

Please note that the Pre-Conditioner is best used with our traditional colours - we would not recommend using it with African Ebony, Seawashed White, Driftwood Grey or Driftwood Brown.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
C
Caroline
Excellent

Very easy to good, good instructions.

A
Anonymous
Excellent customer service

I purchased Floor Dye pre-conditioner, before using needed to ask a few questions. Contacted them and left message. They phoned back within 5 mins and after speaking with the MD said they didn’t think this was the right product for what was needed, so to return. I returned product and issued with refund by return. Would definitely recommend this company for customer service. Thank you.

A
Anonymous
Very nice to use

I used this on a very tricky piece of laminated beech...several coats and eventually I managed a uniform tone, I put hat down to the wood rather than the dye, which developed a very nice , rich colour.
Glad I ordered the 500ml bottle.

b
brian
First class company

Was easy to use and did the job perfectly.

Preparation

Careful and thorough preparation will result in a far superior final result.

Prepare a test piece or use an inconspicuous area of your floor to judge the effect of using the conditioner before the dye, compared to applying the dye without conditioning the wood first. 

Application

A single, liberal coat should be enough. It can be applied with a good quality brush, applicator pad, roller or spray. Aim to apply the conditioner as quickly and evenly as possible to one or two boards at a time, working along their entire length. If you are working on a larger floor, consider having a second person apply the conditioner with you. They could start the next board when you are approximately halfway. This should help you maintain a ‘wet edge’ and avoid overlapping.

Our products come complete with easy to follow yet comprehensive instructions to guide you through every step, including preparing the wood.  Should you require any further help please feel free to get in touch for expert advice. 

You may also like