Water-Based Wood Stain - Naturals
Littlefair's Wood Finishing Products
SKU: ASP-15ML-FBA
Indoor Use - Water Based - Eco-friendly - Non-Toxic
Quick Drying - Low Odour - Lightfast - Easy Brush Clean
| Drying Time |
Touch dry in approximately 2 hours. Please note: this is an approximate drying time. There could be a number of factors that may affect this. |
| Coverage |
Approx. coverage of 10-12m² per litre, for one liberal coat. |
Littlefair's Water Based Wood Dyes are lovingly bottled by hand in the North West of England using the unique colour formulae created by Mr. Littlefair himself.
We bring you a unique formula that penetrates the wood to produce a beautiful aged appearance on timber such as furniture, doors, skirting boards, architraves & mouldings.
If you wish to apply one of our dyes to your floor, please take a look at our Water Based Interior Floor Dye.
Our Antique Stripped Pine will create an authentic 'old stripped pine' effect, Dark Pine will create a warm and mellow colour, Golden Pine, Light Oak & Light Rosewood will create a warm, more modern shade, whilst Black Ebony, Brown Mahogany, Dark Red Mahogany, Very Red Mahogany, Dark Walnut, English Oak, French Oak, Golden Oak & Medium Oak will create an authentic hardwood colour.
Littlefair's Water Based Wood Dye produces a more natural 'positive' grain effect. Most other wood stains are more easily absorbed into the softer areas of the wood between the darker details of the natural grain. This results in a 'negative' stain effect as it causes the softer area to go darker which in turn leads the actual grain appearing lighter. Littlefair's Water Based Wood Dye enhances the darker details of the natural wood grain and produces the desired natural finish.
|
Colour Reproduction
We endeavour to reproduce our colours and finishes as accurately as possible - both online and in print. However there are a range of factors to consider when comparing our samples to your chosen project: the type and condition of the surface itself may produce a slightly different appearance of the finished colour. Please bear in mind the shape, size and lighting conditions. |
|
Please note: Our Water Based Wood Dyes have a matt appearance when dry and come to life when finished with Littlefair’s Wood Finishing Products. We recommend finishing your project to provide the dyed wood with extra protection. We do not recommend finishing Black Ebony with matt varnish as this can create a cloudy appearance. |
Interior Wood Dyes are for indoor use only. If you require an exterior version of these wood dyes, please click here.
A range of Interior Water-Based Wood Stains suitable for hand, spray or dip application
Littlefair's Top Tip
To help create a fine finish you could raise the grain before the final sanding. Start by dampening the wood with a thin film of water. Once dry, a final sanding will restore the flatness ready for applying the stain.
Preparation
Careful, thorough preparation will result in a far superior finish.
Ensure your wood is as clean as possible and free from previous finishes. Do not apply the stain to wet surfaces. Well sanded wood will be far more receptive to stain, and this will form the basis for a good quality finish. Avoid cleaning the wood with white spirit!
Upturn and shake well for a few moments prior to use, ensuring any sediment is well mixed and the colour of the liquid is consistent throughout the entire bottle. Repeat prior to each use of the stain.
Application
Apply the stain liberally along the grain with a good quality brush, alternatively the stain can be sprayed.
Please note that each stain may require a different number of coats depending on the shade you desire. Further coats will deepen the shade if required.
We recommend using protective gloves and splash goggles during use and simply wash out your brush with cold water afterwards.
Completion
Once dry, the stained wood can be finished with a variety of protective products depending on the desired result.
Our Extra Strong Varnishes or Superior Worktop and Danish Oils will provide greater protection. Once the varnish or oil is completely dry, you can apply wax polish to create a durable yet softer, silky feel. Our Extra Strong Varnishes are quick drying and non-yellowing - ideal for producing a tough furniture finish on most wooden items.
The oils will be more suitable in damp conditions however to achieve a tough waterproof coating, Littlefair’s Titan Topcoat can be used for superior robust protection.
It’s important to note that the final appearance will be a combination of the natural colour of your wood, the effect of the stain and the finishing product if used. With this in mind - always produce a test piece so you can properly judge the result.
You may also like
