Pre-Stain Wood Conditioner - Flooring

Littlefair's Wood Finishing Products SKU: FDPC-15ML
Pre-Stain Wood Conditioner - Flooring
Pre-Stain Wood Conditioner - Flooring
Pre-Stain Wood Conditioner - Flooring
PLEASE NOTE: Images are for illustration only. The final appearance can vary based on wood type, number of Wood Stain coats, and protective product. With this in mind – always prepare a test piece so you can properly judge the finish.
Pre-Stain Wood Conditioner - Flooring
Pre-Stain Wood Conditioner - Flooring
Pre-Stain Wood Conditioner - Flooring

Pre-Stain Wood Conditioner - Flooring

Littlefair's Wood Finishing Products SKU: FDPC-15ML
Size
For Wood Floors
Water Based
Eco Friendly
Easy to apply
Low Odour
Quick Drying
  • Shipping Worldwide
  • Secure payments
  • In stock, ready to ship
  • Sorry this is not available right now!
/
Tax included. Shipping calculated at checkout.
 Drying Time

The Wood Conditioner will be touch dry in minutes and fully dry after 1 hour, ready to apply your chosen Littlefair’s Floor Stain.

Please note: this is an approximate drying time. There could be a number of factors that may affect this. 
Coverage

Approx. coverage of 15m² per litre, for one liberal coat.

This water-based formula is intended for use before applying Littlefair’s Floor Stain. It will soak into the wood and help create a consistent surface for staining.

Please note we do not recommend using Wood Conditioner with African Ebony, Seawashed White and Driftwood Grey Floor Stain. 

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Preparation

Careful and thorough preparation will result in a far superior final result.

Prepare a test piece or use an inconspicuous area of your floor to judge the effect of using the conditioner before the dye, compared to applying the dye without conditioning the wood first. 

Application

A single, liberal coat should be enough. It can be applied with a good quality brush, applicator pad, roller or spray. Aim to apply the conditioner as quickly and evenly as possible to one or two boards at a time, working along their entire length. If you are working on a larger floor, consider having a second person apply the conditioner with you. They could start the next board when you are approximately halfway. This should help you maintain a ‘wet edge’ and avoid overlapping.

Our products come complete with easy to follow yet comprehensive instructions to guide you through every step, including preparing the wood.  Should you require any further help please feel free to get in touch for expert advice. 

You may also like