Drying Time |
Touch dry in approximately 2 hours. Please note: this is an approximate drying time. There could be a number of factors that may affect this. |
Coverage |
Approx. coverage of 10-12m² per litre, for one liberal coat. |
Littlefair's wood dyes are lovingly bottled by hand in the North West of England using the unique colour formulae created by Mr. Littlefair himself.
A unique formula that both penetrates and coats bare, sanded wood. It can be applied as a light wash effect or, with further coats, create a lovely soft pastel appearance.
The ingredients in this dye allow it to be applied as a pale, transparent wash with more of the natural wood colour showing through - further coats will deepen the shade and create a more solid colour with a soft pastel, almost ‘chalky’ appearance.
Colour Reproduction
We endeavour to reproduce our colours and finishes as accurately as possible - both online and in print. However there are a range of factors to consider when comparing our samples to your chosen project: the type and condition of the surface itself may produce a slightly different appearance of the finished colour. Please bear in mind the shape, size and lighting conditions of your project. |
Please note: We do not recommend applying pastel dyes to decking, or in a place subject to standing water, as the ingredients can often prevent the dye from penetrating the wood thoroughly, having an adverse effect on the protective properties. Our Water Based Wood Dyes have a matt appearance when dry and come to life when finished with Littlefair’s Wood Finishing Products. We recommend finishing your project to provide the dyed wood with extra protection. |
Exterior Wood Dyes are intended for outdoor use but can also be used indoors.
Want to read more? Please take a read of our Pastel Colours blog here!
A range of Exterior Water Based Wood Dyes suitable for hand, spray or dip application
Preparation
Careful, thorough preparation will result in a far superior finish.
Ensure your wood is as clean as possible and free from previous finishes. Do not apply the dye to wet surfaces or if there is a risk of rain or frost.
Application
The dye can be applied liberally with a good quality brush or sprayed onto pressure treated (Tanalised) rough sawn or smooth planed wood, sheet materials such as plywood and all raw, sanded, new or old wood.
Drying time is about 2 hours and a second or further coats will deepen the shade if required.
We recommend using protective gloves and splash goggles during use and simply wash out your brush with cold water afterwards.
Completion
Littlefair's Water Based Exterior Wood Dye will provide excellent outdoor protection and enhance the grain of the wood to create a natural matt appearance.
The colour can be further enhanced by applying our Superior Danish Oil or our Water Based Titan Topcoat.
If applying to decking, use our Decking Oil Plus+ for greater protection against wear and tear and maximise the UV protection. The decking oil will dry back to a natural looking matt when applied over the dye and create the ‘duck’s back’ water beading effect.
It’s important to note that the final appearance will be a combination of the natural colour of your wood, the effect of the dye and the finishing product if used. With this in mind - always produce a test piece so you can properly judge the result.